Fall protection failure incidents in mines can be prevented with propert education and training.Fall Protection Failure resulting in an employee fatality was the subject of a June  2016 inspection by the United States Department of Labor’s Mine Safety and Health Administration.  The agency issued citations to Texas-based open pit mine and cement facility, Ash Grove Cement Company, and labor and equipment contractor, Superior Construction Maintenance, for various violations. These citations came as the result of a May 10th, 2016 MSHA investigation, which was prompted by the death of 46 year-old maintenance worker, Roderick Barnes. Both Ash Grove and Superior Construction, who was contracted by Ash Grove for labor at their facility, were found deficient in their processes.

MSHA determined that Barnes, who was asked to attend to a slurry tank rake by his supervisor, fell approximately 50 feet through a hole in the floor grating from a platform above the tank, to his death. Fall protection failure incidents are preventable in all cases with training and education. MSHA determined that the following violations existed:

  • Failure to provide protective devices to protect persons or materials from falling into the 3’ x 4’ opening in the floor
  • Failure to ensure barricades and warning signs were provided to notify employees of the 3’ x 4’ opening in the floor
  • Failure to ensure the use of fall-protection in a hazardous environment

In total, Ash Grove and Superior Construction Maintenance were issued multiple citation involving the fall protection failure. Corrective actions taken to prevent recurrence of accidents at the site were as follows:

  • Implementation of Hazardous Opening Protection Plan
  • Implementation of Hazardous Opening & Handrail Removal Permit
  • Implementation of Working at Heights Permit Program
  • Installation of substantial barricades to prevent entry at floor-grating hole
  • Posting of readily visible & legible warning signs at all points of entry, displaying the nature of the hazard and protective action required
  • Development of a written fall protection policy
  • Training of all affected miners on the use of appropriate fall protection and the mandatory policy for use of those systems

Fall protection faily and signage to notify employees of the necessity and mandatory policy for the use of fall protection are necessary for all employees in the mining industry. One resource that safety leaders can utilize to ensure MSHA compliance and the safety of their employees is a MSHA-approved training course.

Fall Protection Failure Cited by MSHA For Texas Pit Mine Contractor